Directional size magnification (inch), Slip sheets, 2directional size magnification (inch) – Ricoh 850 User Manual
Page 130
Copying
82
2
Directional Size Magnification (inch)
The suitable reproduction ratios will be automatically selected when you enter
the horizontal and vertical lengths of the original and copy image you require.
1: Horizontal original size
2: Vertical original size
3: Horizontal copy size
4: Vertical copy size
Preparation
Specify the vertical and horizontal sizes of the original and those of the copy,
as shown in the illustration.
Note
❒ You can enter sizes within the following ranges:
❒ You can select ratios within the following range:
• Metric version: 25 - 400%
• Inch version: 25 - 400%
❒ If the calculated ratio is over the maximum or under the minimum ratio, it is
corrected within the range of the ratio automatically. However, with some ra-
tios, parts of the image might not be copied or blank margins will appear on
copies.
Metric version
1 – 999 mm (in 1 mm steps)
Inch version
0.1" – 99.9" (in 0.1" steps)
1
3
2
4
CP2M01EE