Ricoh 850 - Manual (Page 74)

Copying
26
2
Setting Originals
Limitation
❒ Set originals after correction fluid and ink has completely dried. Not taking
this precaution could mark the exposure glass and cause marks to be copied.
Note
❒ Normally originals should be aligned to the rear left corner. However, some
copy functions may produce different results depending on the direction of
the originals. For details, see the explanations of each function in this manual.
Reference
See
⇒
P.15 “Originals”.
Setting Originals on the Exposure Glass
A
Lift the document feeder.
Note
❒ Be sure to open the document feeder by more than 20
°
otherwise the orig-
inal size might not be detected correctly.