Setting special originals – Ricoh 850 User Manual
Page 481
Setting Originals
31
2
Note
❒ It is recommended to use this function together with the Auto Paper Select
or Preset Reduce/Enlarge function.
❒ Copy results may differ depending on the combination of selected func-
tions.
Setting Special Originals
Mixed Sizes Mode
Use this mode for copying an original that contains pages of different sizes.
If you copy this kind of original from the document feeder using standard copy-
ing, some parts of the original images may not appear on copies or misfeeds may
occur. However, if you choose Mixed Sizes Mode, the machine automatically
checks the size of each original and makes copies accordingly.
Limitation
❒ Acceptable original weights for this function are in the range 52 – 81 g/m
2
, 14
– 20 lb. Bond.
❒ Acceptable copy paper sizes for this function are as follows:
❒ For smaller originals, the copy image might be skewed since the originals
might not be correctly aligned with the original guide.
❒ If you want to use the Staple function, originals must all be the same width.
❒ Maximum number of copies you can staple, A4-100 copies, A3-50 copies, A3/
A4-50 copies.
❒ If you want to have copies punched, only use paper sizes supported by the
Punch function. If you do not, the machine might stop copying.
A
Press the
[Mixed Sizes]
key.
Metric version
A3 L, B4 L, A4 KL, A5 KL, B5 KL
Inch version
11"
×
17"L, 8
1
/
2
"
×
14"L, 8
1
/
2
"
×
11" KL, 5
1
/
2
"
×
8
1
/
2
"KL