Ricoh 850 - Manual (Page 365)

Settings You Can Change with the User Tools
317
6
Auto Text/Photo A When there are photo(s) and text on the original, this set-
ting determines whether photo or text takes priority.
B Adjust the density of Auto Text/Photo.
Note
❒ Default: Normal
❒
[Service Mode] is the value set during service setup.
❒ [Normal] achieves a good balance between text and pho-
tos.
Photo A For a photo original, adjust the finish quality level to
match the type of photo original.
B Adjust the density.
Note
❒ Default: Normal
❒ If you change this setting during the document server
function is using the finish image may differ.
❒ [Service Mode] is the value set during service setup.
❒ Select [Press Print] for printed photo originals with
coarse dots, and [Glossy Photo] for printed photo origi-
nals with fine dots.
❒ ”Normal” is a well-balanced quality level for printed
Photo, Pale, Photo, and Text.
Pale A Adjust the quality level for the finish of a pale original
with normal density.
B Adjust the density.
Note
❒ Default: Normal
❒
[Service Mode] is the value set during service setup.
Generation A Adjust the quality level so as not to thicken the lines of
the finish image.
B Adjust the density.
Note
❒ Default: Normal
❒
[Service Mode] is the value set during service setup.
Menu Description