Ricoh 850 - Manual (Page 21)

Settings You can Change with the User Tools
11
1
System Reset If no operation is performed for a selected time, the machine
will automatically return to initially selected display.
This function is called “System Reset”. You can set the time
between 10 and 999 seconds.
Note
❒ Default: 60 seconds
Energy Saver Timer The machine enters the Energy Saver mode automatically a
certain time after your job is finished. You can set the time
between 1 and 240 minutes.
Note
❒ Default: 15 minutes (1 minute steps)
Panel Off Timer The machine enters to the Panel Off mode automatically af-
ter your job is finished, after the selected time. You can set
the time between 10 and 999 seconds.
Note
❒ Default: 60 seconds (1 second steps)
Reference
See “Auto Off Timer”
⇒
P.10 “General Features”.
Auto Off Timer The machine turns itself off automatically to conserve ener-
gy a certain time after your job is finished. This function is
called “Auto Off”. You can set the time between 1 and 240
minutes.
Important
❒ If you use these three functions (Energy Saver Timer,
Panel Off Timer and Auto Off Timer), when your copy
job ends, the machine will enter the Panel Off mode ac-
cording to the Panel Off Timer after the specified time.
Next, it will enter the Energy Saver mode according to
the Energy Saver Timer after the specified time. Then it
will turn itself off automatically according to the Auto
Off Timer after the specified time.
Note
❒ Default:
• Type1: 90 minutes (1 minute steps)
Type2: 120 minutes (1 minute steps)
❒ Auto Off might not be effective when an error message is
displayed.
❒ To return to the Ready condition from Auto Off, the ma-
chine requires the same warm-up time as the time for be-
coming ready after its power is turned on.
Menu Description