Copying onto ohp transparencies – Ricoh 850 User Manual
Page 89
Basic Functions
41
2
A
Press the
[Auto Reduce/Enlarge]
key.
B
Select the paper tray.
Copying onto OHP Transparencies
To make copies onto OHP transparencies, you need to specify the paper type.
For details, see “Tray Paper Settings” in the System Settings manual.
A
Open designated OHP tray (Tray2-6).
B
Lightly insert the OHP transparencies face up.
Note
❒ If you would like slip sheets (blank or copied) between your OHP trans-
parencies, see
❒ You cannot set the OHP transparencies into the Tandem Tray or optional
A3/11"
×
17 " Tray Kit.
❒ To avoid paper misfeeds, fan the OHP transparencies before setting it in
the tray.
C
Select the paper tray in which OHP transparencies are loaded.
D
Set your originals then press the {
Start
} key.
Important
❒ When copying onto OHP transparencies, remove copied sheets one by
one.