Ricoh 850 - Manual (Page 723)

If Your Machine Does Not Operate as You Want
273
5
If You Cannot Exit Connect Copy
Machine Status Cause Action
Nothing happens when
you press the
[Connect] key.
Originals are being
scanned or copied. Press the master unit
{
Stop } key and them press
[Yes] key to cancel scan-
ning or copying.
There is a paper misfeed in
either the master unit or
sub-unit. Clear the paper jam in the
master unit or sub-unit.
Reference
See
⇒
P.289 “ x Clear-
ing Misfeeds”
See
⇒
P.304 “ e Remov-
ing Jammed Staples”
If the “Cover Open” dis-
play appears, follow the
instructions given.
For any other problems,
follow the instructions that
are displayed.
To exit Connect Copy
mode, press the master
unit {
Stop } key, then press
the [Connect] key.
The master unit { Stop } key
was pressed and scanning
of the original has been in-
terrupted.
To exit Connect Copy
mode, follow the instruc-
tions on the display, then
press the
[Cancel] key.
The { Stop } key was pressed
on either the master unit or
sub-unit and copying has
been interrupted.
To exit Connect Copy
mode, follow the instruc-
tions on the display, then
press the
[Cancel] key.