Ricoh Aficio Color 5560 User Manual
Page 190
Specifications
178
8
*6
Press [Bypass], and the
{{{{#}}}} key, and then enter the paper size using the number keys.
*7
If you wish to copy onto OHP transparencies or thick paper, select “OHP” or “Thick
Paper”.
*8
The optional B4 JIS/8
1
/
2
"
× 14" tray unit is required to load B4 JIS/8
1
/
2
"
× 14" size
paper. (2,500 sheets can be loaded in this tray.)
*9
When loading paper, make sure the stack height does not exceed the lower limit
mark of the paper tray. The amount of paper that can be set is 10 mm/100 sheets ap-
proximately. See p.105 “
B Loading Paper”.
*10
It is recommended to place one sheet at a time.
*11
Depending on the paper thickness, the actual paper capacity may be less than speci-
fied.
When loading translucent papers, set the paper direction according to the grain.
Important
❒ If you use damp or curled paper, a misfeed may occur.
Note
❒ When loading paper in the paper trays 1-3, place the copy side face down.
❒ When loading paper in the large capacity tray (LCT), place the copy side face
down.
❒ When loading paper in the bypass tray, place the copy side face up.
❒ When you use the bypass tray, it is recommended to set the copy paper direc-
tion to
L.
❒ Do not use paper for inkjet printers.
❒ Do not use Colour OHP transparencies with coatings that are easily melted
by heat.
❒ To prioritize image quality when printing on OHP transparencies, make sure
you adjust the guides in the tray to “A4
K” or “8
1
/
2
”
×11”K”, and specify
[Tray Paper Size: ]
in User Tools menu.
❒ When you load OHP transparencies, check the front and back of the sheets,
and place them correctly, or a misfeed might occur. Set the paper direction to
K. For details, see Copy Reference.
❒ When you use OHP transparencies, fan them for each use.
❒ We recommend that you use a 4000ANSI lumen or brighter overhead projec-
tor to project OHP transparencies.
❒ If multiple sheet feeding occurs, load sheets one by one.
❒ When you load label paper, set the paper direction to K.
ZGJS870E
VenusC1_GB_zen_Pre_FM.book Page 178 Tuesday, January 17, 2006 3:27 PM