Ricoh Aficio Color 5560 User Manual
Page 68
User Tools (System Settings)
56
4
❖
❖
❖
❖ Output: Printer
You can specify a tray to which prints are delivered.
Note
❒ Default: Copy Tray, Finisher Upper Tray
❒ The output trays set on the printer driver have priority over the output tray
specified above.
❒ The default settings may vary depending on the finisher installed.
❖
❖
❖
❖ ADF Original Table Elevation
You can set the timing for elevating the ADF original table.
Note
❒ Default: When Original is Set
❖
❖
❖
❖ Job List Display Time
You can set the length of time that the job list display is shown before the dis-
play reverts back to the default screen.
Note
❒ Default: 15 seconds
❖
❖
❖
❖ <F/F4>Size Setting
Currently three types of F size are available: 8
1
/
2
"
×13"L, 8
1
/
4
"
×13"L and
8"
×13"L. The ADF or exposure glass cover sensor cannot distinguish these
three types of originals. This function sets the F size from the ADF or expo-
sure glass cover sensor. Auto Paper Select or Auto Reduce / Enlarge can be
used for F size originals based on this setting.
AFU046S
VenusC1_GB_zen_Pre_FM.book Page 56 Tuesday, January 17, 2006 3:27 PM