Ricoh Aficio Color 5560 - Manual (Page 73)

Settings You Can Change with User Tools
61
4
• Batch of more than one paper type
• Sheets shorter than 160 mm (only if loaded in the bypass tray)
❖ ❖ ❖ ❖ Double Feed Detect
You can specify whether or not the machine stops if more than one sheet of
plain, thin, thick 1, thick 2, or translucent paper, or more than one OHP trans-
parency is fed simultaneously.
• On
• Off
Trays that can be specifed:
• Bypass Tray
• Tray 1
• Tray 2
• Tray 3
• LCT
Note
❒ Default: On
❒ With certain paper types, double feeds cannot be detected.
❒ Depending on the paper type, the machine may detect double feeds even
though they have not actually occurred. In this case, specify “Off” for this
setting.
❒ If you select duplex copying, the paper type of the backs of originals can-
not be detected.
❒ [Double Feed Detect] works only if you select “No Display”, “Recycled Pa-
per”, “Translucent Paper”, or “OHP” in [Paper Type: ] in System Settings.
❒ Double feeds cannot be detected with the following paper types:
• Printed paper or copies
• Colored paper
• Preprinted paper
• Paper with holes
• Smudged, damaged, or torn paper
• Back of paper
• Batch of more than one paper type
• Sheets shorter than 160 mm (only if loaded in the bypass tray)
VenusC1_GB_zen_Pre_FM.book Page 61 Tuesday, January 17, 2006 3:27 PM