Ricoh Aficio Color 5560 - Manual (Page 74)

User Tools (System Settings)
62
4
Timer Settings
❖ ❖ ❖ ❖ Auto Off Timer
The machine turns off automatically to conserve energy after a specified time
has elapsed following job completion. This function is called “Auto Off”.
The machine status after Auto Off operation is referred to as “Off mode” or
“Sleep mode”. For the Auto Off Timer, specify the time to elapse before Auto
Off.
Note
❒ Default: 90 minute(s)
❒ When in “Off mode” or “Sleep mode”, the machine is ready for use within
480 seconds.
❒ The time can be set from 1 to 240 minutes using the number keys.
❖ ❖ ❖ ❖ Energy Saver Timer
You can set the time that the machine waits before switching to lower power
mode after copying has finished or the last operation is performed.
The time can be set from 1 minute to 240 minutes using the number keys.
Note
❒ Default: 15 minute(s)
❒ When in "Energy Saver Mode", the machine is ready for use within 240 sec-
onds.
❖ ❖ ❖ ❖ Panel Off Timer
You can set the time that the machine waits before switching the panel off af-
ter copying has finished or the last operation is performed.
Note
❒ Default: 60 seconds
❒ The warm up time for making a copy from standby mode is 0 seconds.
❒ The time can be set from 10 to 999 seconds, in one second increments, using
the number keys.
❖ ❖ ❖ ❖ System Auto Reset Timer
The System Reset setting automatically switches to the screen of the function
set in Function Priority when no operations are in progress, or when an inter-
rupted job is cleared. This setting determines the system reset interval. See
p.53 “Function Priority”.
Note
❒ Default: 60 seconds
❒ The time can be set from 10 to 999 seconds, in one second increments, using
the number keys.
VenusC1_GB_zen_Pre_FM.book Page 62 Tuesday, January 17, 2006 3:27 PM