TurboChef Technologies High h Batch - Manual (Page 10)

ii S A F E T Y I N S T R U C T I O N S
P R E V E N T I N G O V E N D A M A G E
When servicing this appliance, do not tear insulation to get to components. Rather, find the edge of
the insulation and remove the tape that holds it in place.
Operate the oven only when food is in the Cook Chamber.
Clean the oven daily.
Clean the oven only with TurboChef Oven Cleaner.
x
DO NOT clean with a water jet.
x
DO NOT slam or mishandle the oven door.
x DO NOT frequently open and close the door to check the cook status of the food.
x DO NOT allow cleaning solution or water to remain in the Cook Chamber longer than necessary.
G R O U N D I N G I N S T R U C T I O N S
WARNING: Improper grounding increases the risk of electric shock.
This appliance must be grounded. It is equipped with a cord that has a grounding wire and plug that,
in the event of an electrical short circuit, reduce the risk of electric shock by providing an escape wire for
the electric current. The wire must be plugged into an outlet that is properly installed and grounded.
Consult a qualified electrician or serviceman for help understanding
Grounding instructions
Whether or not the appliance is properly grounded
x
DO NOT use an extension cord. If the power supply cord is too short, request a qualified electrician
or serviceman to install an outlet near the appliance.
P O W E R C O R D R E P L A C E M E N T
To avoid potential hazards, only the manufacturer, its service agent, or a similarly qualified person should
replace a damaged power cord.