TurboChef Technologies High h Batch - Manual (Page 61)

43 T H E C O N T R O L S Y S T E M
Thermostat – Cooling Fan (Figure 48)
The Cooling Fan Thermostat actuates the
cooling fans when the Electrical Compartment
Temperature reaches 120°F (49°C).
To replace a defective Cooling Fan Thermostat:
1. Ensure “Cool Down” process is completed (“Cool
Down” message will disappear upon completion)
and unplug the oven.
2. Remove Right Side Panel.
3. Pull back insulation where necessary.
4. Disconnect the Wiring Harness from the
Cooling Fan Thermostat.
5. Replace defective thermostat with P/N 102086.
6. Reconnect Wiring Harness.
7. Reset insulation and reattach Right Side Panel.
N U M B E R PA R T PA R T N U M B E R
50 Thermostat – Cooling Fan 102086
51 Screw – Thermostat – Cooling Fan (x2) 101687
        : Removing Cooling Fan Thermostat
51
50