TurboChef Technologies High h Batch User Manual
Page 42
D I A G N O S I N G A N I S S U E
LEFT
RIGHT
: Checking Heater B
Step: 1/2
Step: 3
Simultaneously press and hold for 1
second to get to the Test Mode Menu
(Screen 1). NOTE: Oven must be in
the Off or Cool-down State.
In this example, Heater B is on.
: Testing the Rack Oscillator
LEFT
RIGHT
Step: 1/2
Step: 3
Simultaneously press and hold for 1
second to get to the Test Mode Menu
(Screen 1). NOTE: Oven must be in
the Off or Cool-down State.
In this example, the Rack Oscillator is on.
: Enabling/Disabling the Diagnostic Mode
LEFT
RIGHT
Step: 2
Step: 3
Simultaneously press and hold for 1
second to get to the Test Mode Menu
(Screen 1). NOTE: Oven must be in
the Off or Cool-down State.
In this example, the Diagnostic Mode is
enabled. If it were disabled, the screen
would read “Normal Display” rather
then “Diag Display”.
Step: 1
26