TurboChef Technologies High h Batch - Manual (Page 69)

49
N U M B E R PA R T PA R T N U M B E R
62 Door HHB-8080-2
        : Removing the Oven Door
62
Rotate Hinge Retainer
forward to unlocked position
T H E O V E N D O O R
This section contains information on the Oven
Door as it pertains to
Serviceable Component Information and
Replacement Instructions
Parts and Part Numbers
Troubleshooting
For more comprehensive hardware descriptions, see
page 69.
S E R V I C E A B L E C O M P O N E N T S
The following components of the oven door may
at some point need to be replaced
Door Gasket
Door Hinge
Door Switch
To access these components, first remove the Oven
Door (Figure 51):
1. Ensure “Cool Down” process is completed. (“Cool
Down” message will disappear upon completion.)
2. Open oven door.
3. Rotate hinge retainers to the unlocked state.
4. Raise oven door so it rests on hinge retainers.
5. Remove door.