TurboChef Technologies High h Batch - Manual (Page 30)

O P E R AT I N G T H E O V E N
2. Verify Write Card function is enabled (for
instructions, see page 9).
3. Insert Smart Card into Smart Card Reader
Orient card as shown in Figure 19.
4. Press the bottom left Soft Key.
5. Press middle left Soft Key to SAVE MENU TO
CARD (Figure 20).
6. Press the “ENTER” Key to confirm or the
“BACK/STOP” Key to cancel. After approxi-
mately 5 seconds, screen will display that menu
has saved to the card (Figure 21, page 15).
Checking Recipe Counter (Figure 22)
To view how many times each recipe (Food Item)
has been used:
1. Simultaneously press and hold middle left and
middle right Soft Keys for 3 seconds.
2. Screen will display food items in first food
group. To view other food groups, use the “UP”
and “DOWN” Key.
3. After viewing desired Food Items, press the
“BACK/STOP” Key to exit the menu.
NOTE: To erase counters, press the “ENTER” Key
when viewing the totals.
LEFT
RIGHT
1ST GROUP
FIRST ITEM
SECOND ITEM
THIRD ITEM
FOURTH ITEM
FIFTH ITEM
SIXTH ITEM 0
1
0
0
0
0
ZERO COUTNERS? PRESS “ENTER”
        : Checking the Recipe Counter
Step: 1 Step: 3
In this example, the second item (recipe) in the first group has completed one cook cycle.
Step: 2
At any point, the operator can zero out the
counters for a given group.
16