TurboChef Technologies High h Batch User Manual

Page 106

Advertising
background image

75

G L O S S A R Y O F T E R M S

Temperature Offset

Feature that provides accurate temperature readings
of where food actually cooks as opposed to where
thermometer is located. Can be modified in Test
Mode Menu.

Test Mode Menu

Menu from which technician can run diagnostics
and check statistics. The oven must be in either the
Off State or Cool-down State to access the Test
Mode Menu.

Thermocouple – CC

Cook Chamber Thermocouple. This Type K ther-
mocouple measures the temperature of the recircu-
lating impingement airflow.

Thermocouple – EC

Electrical Compartment Thermocouple. Located
on the I/O Control Board, this Type K
Thermocouple measures the temperature of the
Electrical Compartment.

Thermostat – Cooling Fan

Actuates the cooling fans when EC temperature
reaches or exceeds 120°F (49°C).

Thermostat – Hi-Limit

The Hi-Limit Thermostat is a 250VAC, 3-Pole,
manual-reset thermostat with a trip point of 572ºF
(300°C). The Thermostat, which interrupts power
to the Heater Element, should never operate during
normal operation.

Time Screen

Screen from which operator can adjust total cook
time before initiating a Cook Cycle.

Total Cook Time

Temporal measurement of a Cook Cycle.

TurboChef Oven Cleaner

Cleaning solution that is safe to use on the High
h Batch oven. Using other cleaners may damage
critical parts and void warranty. To order call
800.90TURBO.

Voltage Sensor

Proprietary device designed to measure incoming
line voltage and switch between 208 and 240 VAC
operation. The sensor is only included in ovens
operated in North and South America.

Warm-up State

State during which the oven warms itself to the
predetermined Cook Chamber temperature.

Wiring Harness

System of wires that distributes power to each of
the oven’s components. Consists of Low-voltage
harness and Line-voltage harness.

Write Card Function

Function that allows operator to save a Recipe Menu
to a Smart Card. This function can be enabled or
disabled in the Options Menu, as overwriting a
Smart Card is not generally recommended.

Advertising