TurboChef Technologies High h Batch - Manual (Page 45)

D I A G N O S I N G A N I S S U E
        : Viewing/Entering the Serial Number
LEFT
RIGHT
Step: 2 Serial Number will be displayed.
        : Changing the Fahrenheit/Celsius Option
LEFT
RIGHT
Step: 2 In this example, the temperature is
being measured in Fahrenheit. Step: 3 Simultaneously press and hold for 1
second to get to the Test Mode Menu
(Screen 1). NOTE: Oven must be in
the Off or Cool-down State. Step: 1
Step: 6
Simultaneously press and hold for 1 second to get to the Test Mode
Menu (Screen 1). NOTE: Oven must be in the Off or Cool-down State.
Step: 1
29
Changing the Fahrenheit/Celsius Option (Figure 37)
1. From Screen 1 of the Test Mode Menu, press
the “DOWN” Key to toggle to Screen 2 of the
Test Mode Menu.
2. Press the “ºF/ºC” Soft Key (middle right) to
change the type of temperature measurement.
3. When finished, press the “BACK/STOP” Key to
exit the Test Mode Menu.
Viewing/Entering the Serial Number (Figure 38)
1. From Screen 1 of the Test Mode Menu, press
the “DOWN” Key to toggle to Screen 2 of the
Test Mode Menu.
2. Press the “S/N” Soft Key (bottom right) to view
the Serial Number.
3. To change the Serial Number or enter it for the
first time, press either the “UP” or “DOWN”
Key. An editable Serial Number will display
above the current one.
4. Edit each character using the “UP” and “DOWN”
Key. The cursor will move to the next character
if you wait 2 seconds.
5. Press the “ENTER” Key to confirm or the
“BACK/STOP” Key to cancel.
6. When finished, press the “BACK/STOP” Key to
exit the Test Mode Menu.
Step: 5 Step: 3/4