TurboChef Technologies High h Batch - Manual (Page 86)

C L E A N I N G T H E O V E N
Step 5: Check Grease Filters.
Plate is attached via 4 screws.
Check to see if Filters (P/N HHB-8114) need to
be replaced. To order Filters, call 800.90TURBO
or your Authorized Distributor.
If necessary, remove Filters by first unhooking
the Filter Clip (P/N HHB-8115) which is
attached at the center of the Air Diverter Plate.
Step 6: Clean the Cook Chamber and Drain System.
Spray TurboChef Oven Cleaner to break up
stubborn stains. Allow cleaner to penetrate for
5 minutes.
Scrub with nylon scrub pad, if necessary.
Open the Drain Lid and use water to flush out
food particles into the Drain Pan.
Step 7: Dry Cook Chamber and Drain System.
Using a clean dry towel, dry the Cook Chamber
and Drain System.
Step 8: Remove the Drain Pan.
Wash, rinse and sanitize the Drain Pan.
Step 9: Reattach and Reinstall all Clean Components.
Step 10: Wipe Down the Outside of the Oven with a
Clean, Damp Towel.
Top Jetplate
Air Diverter Plate
(covers the Catalytic Converter)
Filter
Oven Rack
Bottom Jetplate
60
        : The Cook Chamber