Server fault indications flowchart – WHP Wireless DL360 User Manual

Page 102

Advertising
background image

102

HP ProLiant DL360 Generation 4 Server Reference and Troubleshooting Guide



7

"HP Insight Diagnostics (on page

80

)"

Server Fault Indications Flowchart

Symptoms:

Server boots, but a fault event is reported by Insight Management Agents (on
page

76

)

Server boots, but the internal health LED or external health LED is red or
amber

NOTE: For the location of server LEDs and information on their
statuses, refer to the server documentation.

Possible causes:

Improperly seated or faulty internal or external component

Unsupported component installed

Redundancy failure

System overtemperature condition

Item Refer

to

1

"Management Agents (on page

76

)"

2 •

"Integrated

Management Log (on page

80

)"

"Event List Error Messages (on page

216

)"

3

Server user guide or setup and installation guide, located on
the Documentation CD or the HP website
(

http://www.hp.com/products/servers/platforms

)

4

System Management Homepage at https://localhost:2381
(

https://localhost:2381

)

5

"Power-On Problems ("Power-On Problems Flowchart" on page

95

)"

6

"Hard Drive Problems (on page

119

)"

Server maintenance and service guide, located on the

Documentation CD or the HP website
(

http://www.hp.com/products/servers/platforms

)

Advertising