100 series – WHP Wireless DL360 User Manual

Page 197

Advertising
background image

Troubleshooting

197

100 Series

List of Messages:

101-I/O ROM Error ....................................................................................................................

197

102-System Board Failure ..........................................................................................................

197

102-System Board Failure, CMOS Test Failed. .........................................................................

198

102-System Board Failure, DMA Test Failed ............................................................................

198

102-System Board Failure, Timer Test Failed ...........................................................................

198

104-ASR Timer Failure ..............................................................................................................

199

162-System Options Not Set ......................................................................................................

199

163-Time & Date Not Set...........................................................................................................

199

172-1-Configuration Non-volatile Memory Invalid ...................................................................

200

180-Log Reinitialized .................................................................................................................

200

101-I/O ROM Error

Audible Beeps: None

Possible Cause: Options ROM on a PCI, PCI-X, or PCI Express device is
corrupt.

Action: If the device is removable, remove the device and verify that the
message disappears. Update Option ROM for a failed device.

102-System Board Failure

Audible Beeps: None

Possible Cause: 8237 DMA controllers, 8254 timers, and similar devices.

CAUTION: Only authorized technicians trained by HP should

attempt to remove the system board. If you believe the system board
requires replacement, contact HP Technical Support before proceeding.

Action: Replace the system board. Run the server setup utility.



Advertising