Or drive cannot read data – WHP Wireless DL360 User Manual
Page 113
Troubleshooting
113
Data read from the drive is inconsistent, or drive cannot read data
Action:
1. Clean the drive and media.
2. If a paper or plastic label has been applied to the surface of the CD or DVD
in use, remove the label and any adhesive residue.
3. Be sure the inserted CD or DVD format is valid for the drive. For example,
be sure you are not inserting a DVD into a drive that only supports CDs.
Drive is not detected
Action:
1. Be sure no loose connections (on page
2. Refer to the drive documentation to be sure cables are connected as required.
3. Be sure the cables are working properly. Replace with known functional
cables to test whether the original cables were faulty.
4. Be sure the correct, current driver is installed.
DAT Drive Problems
List of Problems:
Sense error codes are displayed..................................................................................................
DAT drive error or failure occurs...............................................................................................
DAT drive is providing poor performance .................................................................................
Latest firmware indicates a defective tape, or head clogs occur regularly .................................
Other errors are occurring ..........................................................................................................
Sense error codes are displayed
Action: Refer to the Troubleshooting DAT Drives white paper for information on
DAT drive sense error codes. Search for it on the HP website