WHP Wireless DL360 - Manual (Page 98)

98 HP ProLiant DL360 Generation 4 Server Reference and Troubleshooting Guide
POST Problems Flowchart
Symptoms:
•
Server does not complete POST
NOTE: The server has completed POST when the system attempts to
access the boot device.
•
Server completes POST with errors
Possible Problems:
•
Improperly seated or faulty internal component
•
Faulty KVM device
•
Faulty video device
Item Refer to
1 "POST Error Messages ("POST Error Messages and Beep
Codes" on page
186 )"
2 "Video Problems (on page 126 )"
3 KVM or RILOE documentation
4 "Loose Connections (on page 108 )"
5 Server maintenance and service guide, located on the
Documentation CD or the HP website
(
http://www.hp.com/products/servers/platforms )
6 Server user guide or setup and installation guide, located on
the Documentation CD or the HP website
(
http://www.hp.com/products/servers/platforms )
7 • "Hardware Problems (on page 105 )"
• Server maintenance and service guide, located on the
Documentation CD or the HP website
(
http://www.hp.com/products/servers/platforms )