WHP Wireless DL360 - Manual (Page 200)

200 HP ProLiant DL360 Generation 4 Server Reference and Troubleshooting Guide
172-1-Configuration Non-volatile Memory Invalid
Audible Beeps: None
Possible Cause: Nonvolatile configuration corrupted.
Action: Run the server setup utility and correct the configuration.
180-Log Reinitialized
Audible Beeps: None
Possible Cause: The IML ("Integrated Management Log" on page 80 ) has been
reinitialized due to corruption of the log.
Action: Event message, no action is required.
200 Series
List of Messages:
201-Memory Error...................................................................................................................... 201
203-Memory Address Error........................................................................................................ 201
207-Memory Configuration Warning - DIMM In Socket x does not have Primary Width of 4
and only supports standard ECC ................................................................................................
201
207-Invalid Memory Configuration - DIMMs Must be Installed Sequentially.......................... 201
207-Invalid Memory Configuration - DIMM Size Parameters Not Supported.......................... 202
207-Invalid Memory Configuration - Incomplete Bank Detected in Bank X ............................ 202
207-Invalid Memory Configuration - Insufficient Timings on DIMM ...................................... 202
207-Invalid Memory Configuration - Mismatched DIMMs within DIMM Bank...................... 202
207-Invalid Memory Configuration - Mismatched DIMMs within DIMM Bank...................... 202
207-Invalid Memory Configuration - Unsupported DIMM in Bank x....................................... 203
207-Invalid Memory Configuration - Single channel memory... ............................................... 203
207-Invalid Memory Configuration - Unsupported DIMM in Socket X ................................... 203
209-Online Spare Memory Configuration - No Valid Banks for Online Spare ......................... 204
209-Online Spare Memory Configuration - Spare Bank is Invalid ............................................ 204
212-Processor Failed, Processor X ............................................................................................. 204
214-Processor PPM Failed, Module X ....................................................................................... 204