Znyx Networks bh5700 - Manual (Page 162)

2.
S30e1000 -
Script that loads the e1000 driver module for the Out-of-Band Ethernet
ports. (Editing this script is not recommended.)
S40vpd -
Script that checks the current OA version, and loads into the Vital Product
Data (VPD) area if necessary. (Editing this script is not recommended.)
3.
S50layer2 - Script that sets up a basic Layer 2 switch. All 24 10/100/1000 ports are set
up on one IP network (VLAN).
Ethernet Switch Blade User's Guide release 3.2.2j page 162
Figure 13.1: Default Base Interface Network Diagram