Znyx Networks bh5700 - Manual (Page 324)

zrld
NAME
zrld – ZNYX redirector daemon
SYNOPSIS
zrld [-d <level>] [-p <port>] [-f]
DESCRIPTION
zrld is used for remote management of OA/HA applications. OA/HA applications capable of
remote management include zlc, ztats, zlmd.
zrld only allows requests from hosts listed in /etc/rcZ.d/zrld_trusted_hosts.
OPTIONS
-d <level> Set debug level to <level>
-p <port> Specifies TCP port to listen on. Default port is 7000.
-f Run the daemon in the foreground
EXAMPLES
In the following example, zrld starts a background task that listens on the default port 7000 for
incoming TCP requests and passes along the request to the OA/HA application,
zrld
Once started, you can issue supported commands to the host running zrld from a remote host.
For example, if the host running zrld had an IP address of 10.0.0.42, you could use zlc to
remotely query the status of ports 1 through 5. Remember, the IP address of the switch you are on
must be listed in /etc/rcZ.d/zrld_trusted_hosts on the switch running zrld.
zlc –h 10.0.0.42 zre1..5 query
SEE ALSO
zlc, zlmd, ztats
Ethernet Switch Blade User's Guide release 3.2.2j page 324