Znyx Networks bh5700 - Manual (Page 184)

Chapter 16 Switch Firmware Overview
There are three components to the firmware on the Ethernet Switch Blade:
1. Bootloader firmware (zmon)
2. OpenArchitect firmware
3. IPMI firmware
Some hardware and software problems can be resolved by updating the firmware to the latest
version. Check the Hewlett-Packard website for the latest version (see the HP 5700 ATCA 14-
Slot Blade Server Installation Guide).
Checking the switch firmware version
Use the
zstats –V
command to output the Vital Product Data from switch memory.
zstats –V
The following output is shown for the 3.0 Base Interface:
3.0 Base Interface
Ethernet Switch Blade User's Guide release 3.2.2j page 184
sh-2.04# zstats -V
VITAL PRODUCT DATA: Open Architect Advanced TCA Switch
PN = 700-0170-003
SN = 01BZ0X041HWP
V0 = 00116509E000
V1 = 1021
V2 = 3
V3 = Z
V4 = 1
V5 = 1
V9 = 2
EC = 00000000
VA = 3800
RV = 0x73
V7 = 0
V8 = 0
V6 = 3.2.2 build g
VS = 5
VP = 1.70
VM = 19
VR = 4
VZ = 4.42
RW = 192 bytes
VITAL PRODUCT DATA[1]: Port map ZX7120-HP
VC = 030405060708091011121314H1
VD = F0S2F2F3R0R1R2R31516S102H2
VE = 224223432444254526462747H3
VF = 284829493031323350513435H4
VG = H3NCH1NCNCH2NCH4
V9 = 2
RV = 0x3b
RW = 9 bytes
sh-2.04#