Znyx Networks bh5700 - Manual (Page 312)

zmirror zre1, zre2, zre3 cpu
Is the same as:
zmirror zre1 cpu
zmirror zre2 cpu
zmirror zre3 cpu
Multiple mirroring setups can be made. The following example will mirror port 1 traffic to port
11 and port 2 traffic to port 12.
zmirror zre1 zre10
zmirror zre2 zre11
Setting a different to port will overwrite the previous setting. Given the last setup the following
will change port 1 traffic to be forwarded to port 10.
zmirror zre1 zre10
The following example results in ingress mirroring from port 0 to port 1and from port 2 and 3 to
port 18.
zmirror zre0 zre1
zmirror zre2 zre12
zmirror zre3 zre18
The to port of 12 was over written with the to port 18 .
Use zmirror –a to query the hardware to display the current configuration.
zmirror -a
OPTIONS
-a Display the current mirroring setup
-e Set egress port mirroring for the specified from port
-t Teardown or disable the mirroring
WILDCARDS
Wildcard characters can be included to simplify the process of creating larger, more complex
configurations. Wild card characters for zconfig include:
Ethernet Switch Blade User's Guide release 3.2.2j page 312