Znyx Networks bh5700 - Manual (Page 350)

Sensor Reading Example
This is an example of how to structure a command and response to determine a sensor value. In
this example, a GetSensorReading command is sent from BMC (address 20h in this example), to
the switch in slot 2 (geographical address is B2h) to read the temperature sensor, which is
assigned to sensor number 60h.
Standard IPMI Command: GetSensorReading
Byte Data Field Description
1 rsAddr B2h
2 netFn/Lun 10h
3 check1 3Eh
4 rqAddr 20h
5 seq no 06 (random pick)
6 command 2Dh
7 sensor number 60h
8 checksum2 4Dh
Table C.3: GetSensorReading
Ethernet Switch Blade User's Guide release 3.2.2j page 350