Znyx Networks bh5700 - Manual (Page 198)

application flash. Typically this is required before updating application flash 1. By booting the
alternative image, if a failure occurs during the programming of application flash 1, recovery is
easier.
zbootcfg -d 2
The next example passes the -i option to the booting kernel. This is useful when recovering from
a mistake saved to the read-write file system or after updating the application flash 1 and doing
the first boot. The -i option prevents the read-write file system from overwriting the initial RAM
disk image.
zbootcfg -d 1 –i
SEE ALSO
zflash, reboot(8)
Ethernet Switch Blade User's Guide release 3.2.2j page 198