Znyx Networks bh5700 User Manual
Page 40
failover_mode: port;
# VRRP_msg_rate is the time in milliseconds between
transmissions
# VRRP messages on the interconnect. The VRRP protocol
requires the
# absence of 3 VRRP messages before concluding that the remote
switch
# has failed. The msg_rate must match the msg_rate of all
siblings.
# Anything other than multiples of seconds is non-conformant
# with the VRRP specification and will only run with ZNYX
supplied
# vrrpd.
vrrp_msg_rate: 100; # In milliseconds
vrrp_def_priority: 254;
# start_script: Allows the user to add files and scripts that
are moved
# to the slave switches when they do a zspconfig -u. An
example might
# be the gated configuration script S55... Absolute path
names are
# required. Multiple start_script commands can be used to move
more than
# one file.
#start_script:/etc/rcZ.d/SxxScript;
#start_script:/etc/rcZ.d/SyyScript;
# board_synchronization_mode: Coordinate the HA events between
the Base and
Ethernet Switch Blade User's Guide
release 3.2.2j
page 40