Zenith Data Systems MT2000 - Manual (Page 104)

5-16
Upgrades and Options
Figure 5-5. Inserting Memory DIMMs
4. Press down evenly on the DIMM until it seats
correctly. The white levers on the sockets are not
"tools" to aid in the insertion, only to keep the
DIMM's in place and to aid in extraction. The levers
should click in place once the DIMM is fully
inserted.
5. Repeat the above steps to install any remaining
DIMMs.
6. Install the processor/memory board back into the
system as described later in this chapter.