Zenith Data Systems MT2000 User Manual
Page 106
5-18
Upgrades and Options
Figure 5-6. Installing the Processor/Memory Board
3.
Hold the processor/memory board (see Figure 5-6, B)
by its edges and start to insert it into the slot
guides.
4.
Do not press in on the board yet! Ease board into the
slot guides until it is just touching the connector on
the system board.
Caution: Before pressing the board firmly into the
system board connector, confirm visually that the board
edge connectors are correctly oriented—not too low or
high—at the system board connector.
5.
Press the board carefully but firmly into the system
board connector to seat the board.
Caution: Before applying power, do one more check.
Make sure the board is completely seated in the system
board connector before applying power. Incomplete
insertion can result in damage to the system board and
to the board you have installed.