Zenith Data Systems MT2000 - Manual (Page 107)

5-19
Upgrades and Options
6. Replace the board support panel as described earlier
in this chapter, see Installing the Board Support
Panel.
7. Replace the side panel and turn on the power.
Modifying the System Board
The following sections provide procedures for
upgrading and configuring the system board in your
system. Topics covered include:
■ Installing video memory
■ Replacing the non-volatile memory
■ Replacing the real-time clock battery.
Notice: Electrostatic discharge (ESD) can damage add-
in boards and other components; place them on an
antistatic surface. Modify the baseboard only at an
ESD workstation. Otherwise, wear an antistatic wrist
strap attached to chassis ground.