44 upgrades and options – Zenith Data Systems MT2000 User Manual
Page 132
Advertising
5-44
Upgrades and Options
Figure 5-18. Removing Blank Panel Tray
POWER
STATUS
DISK
POWER
RESET
8.
Grasp the blank panel tray and slide it out of the
bay.
9.
Remove the two screws securing each side rail to
the blank panel tray (Figure 5-19).
10.
Save the blank panel tray and screws to reuse if you
remove a drive from a bay later and do not reinstall
one.
Advertising