Zenith Data Systems MT2000 - Manual (Page 18)

2-4
Features
System Feature Summary
The following provides a summary of the system
features:
Feature Description
System board and
processor/memory board System is intended for use with a system board and
processor/memory board based on Pentium Pro processor
technology; from one to two processors and up to 1 GB of
memory using 128 MB DIMMs.
Add-in board support Rail and back panel slots support up to 8 add-in boards
(three EISA, four PCI, and one shared PCI/EISA).
3 1/2-inch diskette drive 3 1/2 diskette drive is externally accessible.
Six locations for 3 1/2-inch
SCSI-2 hard drives The hard disk drive bay can hold six 3 1/2-inch hot-
swappable ultra wide SCSI-2 hard drives. The bay is
secured behind a lockable metal EMI door; drives can be
swapped in or out of the system without powering it
down, if a Redundant Array of Independent Disks (RAID)
controller module is installed. The array of drives allows
easy setup of optional RAID applications.
Hot swap-capable backplane A hot swap-capable backplane is part of each 3 1/2-inch
drive bay assembly for SCSI drives. The backplane is
designed for wide ultra SCSI-2 devices that use the
industry standard 80-pin Single Connector Attach (SCA)
connector. The backplane consists of two rows of three
drive connectors.
Three locations for removable
media drives Three externally accessible 5 1/4-inch half-height bays
are available for diskette, CD-ROM, and/or tape drives.
Power supply One or two 330 Watt autoranging power supplies are
easily removed/installed for service. In a two-supply
system, the second supply is redundant.
Hot swap-capable cooling
fans Each power supply has two integral cooling fans. Six
more fans provide cooling for boards and drives.