Zenith Data Systems MT2000 - Manual (Page 83)

4-30
Configuring Your System
Table 4-8. System Board Jumper Configurations (continued)
Jumper Description Option Setting Factory
Default
Your
Setting
Model Type
J613 Used with jumpers at
J614, J615, J624, J625,
J626, J628 and J629 to
set the server type Required on factory default. 2-3 2-3 2-3
Model Type
J614 Used with jumpers at
J613, J615, J624, J625,
J626, J628 and J629 to
set the server type Required on factory default. 1-2 1-2 1-2
Model Type
J615 Used with jumpers at
J613, J614, J624, J625,
J626, J628 and J629 to
set the server type Required on factory default. 1-2 1-2 1-2
Reserved
J616 Required on factory default. 2-3 2-3 2-3
Model Type
J624 Used with jumpers at
J613, J614, J615, J625,
J626, J628 and J629 to
set the server type Required on factory default. 2-3 2-3 2-3
Model Type
J625 Used with jumpers at
J613, J614, J615, J624,
J626, J628 and J629 to
set the server type Required on factory default. 2-3 2-3 2-3
Model Type
J626 Used with jumpers at
J613, J614, J615, J624,
J625, J628 and J629 to
set the server type Required on factory default. 2-3 2-3 2-3
Model Type
J628 Used with jumpers at
J613, J614, J615, J624,
J625, J626 and J629 to
set the server type Required on factory default. 1-2 1-2 1-2
Model Type
J629 Used with jumpers at
J613, J614, J615, J624,
J625, J626 and J628 to
set the server type Required on factory default. 1-2 1-2 1-2
Table 4-9. CPU Speed Jumper Configurations
Jumpers
CPU Speed J1A J2A J3A J4A J5B J6B
200/66 MHz 2-3 2-3 1-2 2-3 2-3 1-2
180/60 MHz 2-3 2-3 1-2 2-3 1-2 2-3