9 features, Resetting the system – Zenith Data Systems MT2000 User Manual

Page 23

Advertising
background image

2-9

Features

Table 2-3. System Status Abnormal Conditions

LED (Amber)

Conditions

System Status

Unit fan alarm
Memory multi-bit error (SERR)
P6 bus error SERR)
Thermal sensor (from SCSI distribution board)
Temperature (heceta)
Voltage (heceta)
CPU thermal trip (heceta)
Chassis intrusion (front cover)
PCI PERR# (OPB/ESC detect)
PCI SERR#
CPU internal error
WDT
IOCHK

Resetting the System

There are several ways to reset the system:

Reset button - pressing this button clears system
memory, restarts POST, and reloads the operating
system.

Power on/off - turning the power off and then on
with the power button on the front of the system
has the same effect as pushing the Reset button,
except that power is halted to all peripherals.

Advertising