AASTRA Office 35IP User manual - Manual (Page 47)

Personalizing Your Phone
47
Changing your Personal Code
You want to change the personal code used for locking / unlocking your phone (see "Locking your
phone" and "Unlocking your phone").
The factory setting is digit combination "0000"; you can select any 2 to 10-digit combination for your
new code.
If you have forgotten your personal code, your system administrator can reset it to the factory setting.
<long> Press the Menu key and hold it down for a moment.
The configuration mode is now activated.
Press the Menu key repeatedly until the display shows "Code".
Code Press the "Code" Foxkey.
The display shows "Old code:".
Use the digit keys to enter the current code.
For each digit entered, the display shows an "*".
OK Press the "OK" Foxkey.
The display shows "New code:".
Use the digit keys to enter the new code.
For each digit entered, the display shows an "*".
OK Press the "OK" Foxkey.
The display shows "Confirmation:".
Use the digit keys to enter the new code a second time.
For each digit entered, the display shows an "*".
OK Press the "OK" Foxkey.
The new code is stored.
☛
☛
☛