AASTRA Office 35IP User manual - Manual (Page 57)

Personalizing Your Phone
57
Configuring Line Keys
This section explains how to adapt your Line key settings to suit your personal requirements.
Note: Your system administrator will determine whether your phone has Line keys.
Setting the Response of a Line Key
You want to set the response of a Line key in case you are called on that Line key.
You can choose whether you also want a ringing signal in addition to the flashing LED when you receive
a call on a Line key. You can configure a ringing delay for the ringing tone.
You can choose between answering directly using automatic hands-free operation, picking up the
handset, and pressing the Team key to answer a call.
Answering an external call using automatic hands-free operation is not available.
<long> Press the Line key you want and hold it down for a moment.
The display shows "Line key".
Note The Personal key is also treated as a line key.
OK Press the "OK" Foxkey.
The display shows the ringing properties: Ringing / Ringing delay".
v V Use the " v" or "V" Foxkey to select ringing / ringing delay.
"Off" for no ringing tone, "On" for immediate ringing tone, and "After 10
seconds", "After 20 seconds" and "After 30 seconds".
OK Press the "OK" Foxkey.
The display shows "Melody".
v V Use the " v" or "V" Foxkey to select the melody:
Note You can test the setting using the "Test" Foxkey.
OK Press the "OK" Foxkey.
The display shows "Speed".
v V Use the " v" or "V" Foxkey to select the speed:
Note You can test the setting using the "Test" Foxkey.
OK Press the "OK" Foxkey.
The display shows "Answer".
v V To change the settings used to answer a call: Use the " v" or "V" Foxkey to
select the answering mode:
"Key" for answering the call by pressing the Line key and "Handset" for
answering by picking up the handset.
Note The "Handset" setting only works when the ringing signal is activated.