AASTRA Office 35IP User manual - Manual (Page 58)

Personalizing Your Phone
58
Formulating Functions
This section explains how to activate an individual function, for example call forwarding unconditional,
with the aid of function commands and how to assign it to a key.
Function under a Foxkey
You want to know the status of a function stored under the Foxkey.
Certain functions are shown with a check mark on the display when the function is activated:
•
T visible to the left of the function name: Function is activated.
• T not visible: Function is deactivated.
OK Press the "OK" Foxkey.
The display shows "Priority" or "No priority".
v V Use the " v" or "V" Foxkey to select priority 1 - 8.
Note 1 stands for the highest priority; 8, for the lowest. Available only if
"Handset" answering is selected. Not available to the Personal key.
OK Press the "OK" Foxkey.
The display shows "Seize".
v V Use the " v" or "V" Foxkey to select the type of line seizure:
"Key" for connecting with the corresponding line by pressing the Line key,
"Handset" for connecting with the corresponding line by picking up the
handset.
OK Press the "OK" Foxkey.
The settings are stored.