AASTRA Office 35IP User manual - Manual (Page 55)

Personalizing Your Phone
55
Storing a Team Partner under a Key – Team Key
You and your team partners want to be permanently available as a team. You want to be able to call one
another by pressing a key.
You can configure a configurable key as a Team key and then assign it to a team partner.
You can choose whether you also want a ringing signal in addition to the flashing LED whenever a team
partner is called. You can configure a ringing delay for the ringing tone.
You can choose between answering directly using automatic hands-free operation, picking up the
handset, and pressing the Team key.
Note Besides the predefined functions you can also define your own function.
For more information, please refer to the section "Formulating Functions".
OK Press the "OK" Foxkey.
The function is stored under the key.
<long> Press the configurable key and hold it down for a moment.
Key not configured: The display shows "Number key".
Note Key already configured: See "Clearing a key".
v V Use the " v" or "V" Foxkey to select the "Team key" entry.
OK Press the "OK" Foxkey.
The display reads "Enter number".
Enter the phone number.
OK Press the "OK" Foxkey.
The display shows the ringing properties: Ringing / Ringing delay.
v V Use the " v" or "V" Foxkey to select ringing / ringing delay.
"Off" for no ringing tone, "On" for immediate ringing tone, and "After 10
seconds", "After 20 seconds" and "After 30 seconds".
OK Press the "OK" Foxkey.
The display shows "Melody".
v V Use the " v" or "V" Foxkey to select the melody:
Note You can test the setting using the "Test" Foxkey.
OK Press the "OK" Foxkey.
The display shows "Speed".
v V Use the " v" or "V" Foxkey to select the speed:
☛