YSI MultiLab 4010P-1 - Manual (Page 20)

Operation MultiLab 4010-1
20 ba76141e03 03/2014
4.3 Switching off the meter
4.4 Login with a user name
After activation of the user administration by the administrator (software
MultiLab User, on the enclosed CD-ROM), measurements
are only possible after login with a user name. The user
name is documented with the measured values and in records.
All user names entered by the administrator are listed in the User name menu.
The administrator determines for each user whether or not a
password is required for the login to the meter.
If the Password menu item is grayed out, no password is required for
the login.
If the user administration function is activated, the Login dialog
appears after the meter is switched on (see section 4.4 L
OGIN WITH
A USER NAME , page 20).
The user administration function is not active in the delivery condi-
tion.
1. Switch the meter off with <On/Off>.
1. Switch the meter on with <On/Off>.
The Login dialog appears.
2. Using <><>, select the menu item, User name and confirm with
<MENU/ENTER>.
The user name is highlighted.
3. Using <><>, select a user name and confirm with <MENU/
ENTER>.
User name Admin
Password ####
Change password
Login
03.04.2013
08:00