YSI MultiLab 4010P-1 - Manual (Page 8)

Overview MultiLab 4010-1
8 ba76141e03 03/2014
1.2 MultiLab 4010P-1 meter with integrated printer
The integrated printer of the MultiLab 4010P-1 enables to document measure-
ments according to GLP requirements.
1.3 Sensors
A measuring system ready to measure consists of the MultiLab 4010-1 meter
and a suitable sensor.
Suitable sensors are IDS pH sensors, IDS ORP sensors, IDS conductivity
sensors and IDS D.O. sensors.
1.3.1 IDS sensors
IDS sensors

support the automatic sensor recognition
 show only the settings relevant to the specific sensor in the setting menu
 process signals in the sensor digitally so that precise and interference-free
measurements are enabled even with long cables
 facilitate to assign a sensor to a measured parameter with differently colored
couplings
The information concerning the printer of the MultiLab 4010P-1 is
given in a separate chapter (see section 12 P
RINTER ( ONLY
M ULTI L AB 4010P-1), page 83).
1 Keypad
2 Display
3 Socket field
4 Printer
5 Control panel of the printer
1
2
3
4
5
40
10
-1 P