MoTeC ACL VIM - Manual (Page 15)

MoTeC Operation 11
Display Elements
The display contains a Bar Graph, three Numeric Displays, a Centre Numeric
Display and a Bottom Alpha / Numeric Display.
The display has three main modes of operation, Race, Practice and Warm-up.
Refer to the Display Modes section for details.
Bar Graph Display
The 70 segment Bar Graph has a user definable range and is typically used
as a tacho, however it can be used to display any other value. When used as
a tacho it may be configured to show up to 19000 RPM.
A fully programmable shift point can be displayed, which can also be gear
dependent.
The operation of the Bar Graph can be different for each of the display modes
(Race, Practice and Warm-up). For example a lower range may be used in
Warm-up mode.