MoTeC ACL VIM - Manual (Page 52)

48 ACL Manager Software
Configuration Versions and Updating
Updating
The firmware inside the ACL can be updated by the user at any time to take
advantage of the latest features offered by MoTeC.
To update the ACL firmware version select Online | Upgrade ACL Firmware
from the ACL Manager main menu.
Matching Versions
The version of firmware inside the ACL must match the version of the ACL
Manager software. If the versions do not match, ACL Manager will show a
warning when it attempts to communicate with the ACL.
To check the version of ACL Manager, select Help | About MoTeC ACL
Manager from the main menu.
Configuration File Version
After the ACL firmware version has been upgraded the configuration file in the
ACL must also be updated to match the new version. The display will show a
warning until a new configuration has been sent to the ACL.
Note There is an option to automatically upgrade the configuration file in the
ACL when performing an upgrade. This eliminates the necessity to manually
upgrade the file and then send it. (refer to the Converting Older Version Files
section)