MoTeC ACL VIM - Manual (Page 16)

12 Operation
Numeric Displays
The three Numeric Displays (Left, Right and Top Right) can be programmed
to display any value, which may be different for each of the display modes
(Race, Practice and Warm-up).
Note Each of the three Numeric Displays has a different number of digits and
is therefore suited to displaying different values. For example the Top Right
display can only show values up to a maximum of 199 and is therefore not
suitable for displaying Lap Times, but is suitable for displaying many other
values such as Lap Number, Fuel Remaining, Engine Temperature etc.
The Numeric Displays can show any channel value plus up to two override
values, which are shown each time their value is updated. This is useful for
values that are updated periodically, for example Lap Time. The override
values are shown for a programmable period of time. For example a numeric
display could normally show the Running Lap Time (which is continuously
updating), then be overwritten by the Lap Time for 10 seconds each time the
Lap Time is updated.
Enunciators for some of the common display values are provided above the
Numeric Displays, e.g. ET (Engine Temperature), OP (Oil Pressure).
Centre Numeric Display