MoTeC ACL VIM - Manual (Page 60)

56 ACL Manager Software
Tests
A number of tests are provided to check the operation of the ACL, such as the
Inputs Test.
To run one of the tests select the appropriate test from the Online menu.
Note To test any input on the ACL, the input must first have a channel and
calibration assigned, and have had that configuration sent to the ACL.
Sensor Zeroing
Some sensors require regular zeroing, for example steering angle,
suspension position, ride heights, G-force sensors and throttle position. ACL
Manager provides a screen to allow easy zeroing of all these sensors.
To zero the sensors select Online | Zero Sensors from the main menu.
Details Editor
The Details Editor allows details about the Event, Venue and Vehicle to be
entered.
This data is attached to the logged data file for later reference.
Some of this data is also attached to the configuration to determine the
operation of some functions, for example, the track length is used to
determine lap speed, if used.
To change the details select File | Edit Details from the main menu.