MoTeC ACL VIM - Manual (Page 9)

MoTeC Overview 5
The input and output pins on the display devices are fully accessible
(dependant on the I/O options enabled), with exception of access to RS232
and beacon connection on the digital inputs for ADL2 and SDL.
The update rate and other specifications for the inputs are the same as when
the display devices are used standalone. Refer to Appendix E: Update Rate
Summary.
An exception is the SDL, where SDL inputs AV1 - AV4 can be logged at up to
1000 Hz. Other Analogue Voltage and Analogue Temperature inputs can be
logged at up to 500 Hz and the Switch, Digital and Speed inputs at 100 Hz.
For more detail please refer to the Display section and the Installation and
Configuration section in this manual.
For other details including specifications and wiring information please refer to
the display's user manual.
BR2 Beacon Receiver
A BR2 Beacon Receiver may be connected to the ACL, which allows the ACL
to calculate lap times for display and to provide lap information for the data
logging analysis software.
Note The BR2 must be connected to the ACL via CAN; the ACL does not
support connecting the BR2 to a digital input on the ADL2 or SDL.
Multiple beacon transmitters may also be used to generate split times.
For more detail please refer to the Installation and Configuration section in
this manual and the BR2 Beacon Receiver user manual.
SLM Shift Light Module
The MoTeC SLM Shift Light Module can be used for shift lights, warning lights
and other information lights.
The SLM includes 8 LEDs that can be programmed to any colour.
The SLM connects to the ACL via CAN.
For more detail please refer to the Installation and Configuration section in
this manual and the help screens in the ACL Manager software.
E888 / E816 Expanders
The ACL supports two E888 or E816 Expanders allowing expansion of the
number of inputs and outputs.