MoTeC ACL VIM - Manual (Page 42)

38 Installation & Configuration
If not using CAN bus 0, click on the Advanced button to select the
correct CAN bus.
If a second expander is connected, assign the Expander Inputs (2nd
Expander) template to another CAN section.
Outputs Setup
Using ACL Manager, select Functions | Auxiliary Outputs to configure
the Expander Outputs in the setup screen.
Outputs Communications Setup
Using ACL Manager, select Inputs | Communications to assign the
Expander Outputs template to one of the CAN sections.
If not using CAN bus 0, click on the Advanced button to select the
correct CAN bus.
If a second expander is connected, assign the Expander Outputs (2nd
Expander) template to another CAN section.
GPS Global Positioning System
GPS units can be connected to the ACL via CAN or via RS232, depending on
the unit.
MoTeC GPS
Refer to the appropriate GPS user manual for wiring and configuration details.
Non MoTeC GPS Connection via RS232
GPS Setup
Configure the GPS to send NMEA RMC & GGA messages. Refer to the
device’s user manual for further details.
ACL Setup
Using ACL Manager, select Inputs | Communications, to assign the
GPS - Standard RMC GGA template to one of the RS232 sections.
Non MoTeC GPS Connection via CAN
If connecting the GPS via CAN, a custom template will be required to suit the
unit. Contact MoTeC for details.